TEL : 0755-82775591

When to choose pure final stage power amplifier

Time: 2018-07-26 15:51:19

Author: 深圳市威泰旭电容器有限公司


Insiders have always been very clear, the latter part of the combined power amplifier below 10,000 yuan is not worth considering, especially the new combined power amplifier, the latter stage is serio

Insiders have always been very clear, the latter part of the combined power amplifier below 10,000 yuan is not worth considering, especially the new combined power amplifier, the latter stage is seriously shrunk, false power, is extended to all combined power amplifier.

In fact, many years ago, there was no such thing as cutting corners and reducing the power. It is now found that rivers and lakes are no longer the same, and there are commercial deception everywhere. Years ago, a small flagship amplifier of 10,000 yuan was changed to pure after-level, 60W×3+22W×4, and HTPC+D2 was used to push 7 big boxes to be savory! . In the absence of a subwoofer, I feel a strong sofa. In contrast, today, in so many audio forums, the most talked about is "cannot push", many manufacturers can not move 100-200W × 7 nominal Power, but there is still no push, let me have been depressed, can not understand. I no longer analyze why the manufacturer has to do this. The latter stage of the amplifier is to use a lot of copper and aluminum! As long as people who are a little older should know that copper and aluminum were only a little more expensive than iron in the past, they are worthless. Ordinary people have bronzes everywhere, but today?

Many of my friends don't know much about the performance of the power amplifier. It is wrong to think that as long as the power is large enough, it is king, and there is no way to know the difference between the latter stage of the integrated amplifier and the pure final stage power amplifier. Those friends who open their mouths are to "control", "resolving power", etc., but they don't know how the amplifier can achieve these properties.

A friend once consulted me about a 2-channel pure final stage. I proposed two extremely important concepts, such as "damping coefficient" and "conversion rate", which are not familiar to everyone.

The basic indicator of the power amplifier: rated power.

Today's amplifiers in the US and Europe are marked with rated power. Old power amplifiers are also marked with rated power. Generally, the power is measured in the case of a small distortion (such as 0.015%, the power measured at 20-20 kHz, and the higher-level power amplifier is measured at 0.008%). For powerful output power, powerful power support is absolutely essential! The magnitude of the power reflects the strength of the sound, which is the sense of quantity.

The second basic indicator of the amplifier: various distortions.

The above has shown that this is directly related to the size of the power. When the power of the amplifier is large enough, and only a small part of its power is used, the distortion at this time will be much smaller.

The latter stage of the combined power amplifier often only uses a pair of power tubes. The pairing of the power tubes has a great influence on the distortion. The previous advanced power amplifiers are directly matched to the production line of the device (for example, the distortion of the old power amplifier is very small, Ten thousand yuan is equivalent to 100,000 yuan today.) The cost is very high. Today's tens of thousands of yuan of power amplifiers will not be done this way. In today's poor power tube pairing, it is necessary to reduce the distortion with its small power at high power. The degree of distortion reflects the quality of the sound, which is the texture.

An important indicator for advanced power amplifiers: the damping coefficient.

In addition to power and distortion, an advanced amplifier has a great relationship to the internal resistance of the output. To ensure a small output impedance in high current environments, you must first have high quality high power transformers, high current rectifier circuits and powerful capacitor filtering circuits. These advanced high-level integrated amplifiers are never available due to space and cost constraints. The pure final stage power amplifier is several times larger than the combined power amplifier. Secondly, in order to achieve a powerful output power and a very small transistor output impedance, the pure final stage power amplifier uses several pairs of power tubes to work in parallel, and its control power is also stronger than the combined power amplifier several times, and the combined power amplifier is only used. A pair of output power tubes (look at how many pairs of power tubes can be installed on such a small heat sink?).

Of course, the thickness of the speaker wire, the amount of copper and the quality of the terminal also have a direct impact on the damping coefficient. The damping coefficient reflects the control quality of the amplifier to the bass, which is the control force.








ADD:Room 43A2, 43 / F, Block C, Zhongdian Technology Building, Huaqiang North, Futian District, Shenzhen

COPYRIGHT (©) 2018 SHENZHEN WTX CAPACITOR CO., LTD.  All rights reserved.

Technical Support : NetEase enterprise mailbox  163 mailbox

Service Center
Qrcode(Miss Li)
Qrcode(Yanna Lee)
Service Center